NFPA 99 electrical safety testing for medical & lab equipment in Miami and Florida
On-site electrical safety checks for medical and laboratory equipment across Florida and Puerto Rico, with measured results and clear service records.
Request electrical safety testingCall 305.238.5326Electrical safety testing pricing
Per unit
Starting from $15.00 per unit. Ground and leakage-current testing with measured results, a pass/fail decal and a record for your equipment file.
Whole office or lab
Exam-room and laboratory equipment can be tested on the same visit, and alongside calibration or preventive maintenance, so the travel cost is shared across every instrument.
Parts
Repairs and parts for units that fail are quoted separately.
South Florida (Miami-Dade, Broward and Palm Beach) is usually same-day or next-day. In Tampa Bay, Orlando and Southwest Florida, a technician can often be on site the next day and within 72 hours at most. Puerto Rico is served on planned service trips. Send your equipment count and location for a quote.
The checks that keep powered equipment safe — and compliant
BMCA technicians test ground continuity, chassis and patient leakage current, polarity, and insulation against NFPA 99 limits. We work around your operations, label each device as we go, and hand you certificates ready for any survey.
Why it matters
After initial licensure, many Florida inspections arrive unannounced. An uncalibrated or unverified device is exactly the kind of gap a surveyor finds fast — and the kind a paperwork-only compliance consultant can’t fix, because they don’t touch the equipment. We do both.
Each test includes
- Protective-earth / ground continuity measurement
- Chassis & patient leakage-current testing
- Polarity and wiring-fault checks
- Pass/fail against NFPA 99 limits
- On-device dated safety label
- NIST-traceable certificate for your records
Built for the facilities we serve
Clinical & molecular labs
CLIA-regulated benches full of powered analyzers and centrifuges.
Pathology & Mohs labs
Processors, stainers, and cryostats on a single power-safety schedule.
Residential & specialty care
ICF/IID and group homes with on-site medical equipment.
Medical-center groups
Standardized electrical safety across every location.
Community health centers
Exam-room and lab equipment under one verification program.
IVF & fertility labs
Incubators and critical equipment where safety can’t lapse.
Electrical safety testing for medical & lab equipment — common questions
How much does electrical safety testing cost?
What is electrical safety testing for medical equipment?
How often should electrical safety testing be done?
Does electrical safety testing help with CLIA, CAP, AHCA or Joint Commission inspections?
What equipment needs electrical safety verification?
Do you provide documentation for our records?
Equipment we test for electrical safety
Leakage current, ground-wire resistance and insulation verification to NFPA 99 — on any line-powered device in a patient-care or laboratory area. Reports carry measured values, not just a pass stamp, so you can trend toward failure instead of discovering it.
Laboratory equipment
- Centrifuges
- Incubators
- Water baths
- Shakers & rockers
- Vacuum pumps
- Ovens & furnaces
- Autoclaves
- Homogenizers
Clinical & patient-care
- EKG / ECG units
- Exam tables & chairs
- Surgical lights
- Electrosurgical units
- Suction units
- Infusion pumps
- Patient monitors
- Nebulizers
Histology & pathology
- Cryostats
- Microtomes
- Tissue processors
- Embedding centers
- Autostainers
- Coverslippers
- Flotation baths
- Slide printers
Cold storage & ventilation
- Lab refrigerators & freezers
- Ultra-low freezers
- Blood bank refrigerators
- Fume hoods
- Biosafety cabinets
- Ductless enclosures
What we measure
- Chassis leakage current
- Lead-to-ground leakage
- Ground wire resistance
- Line voltage & polarity
- Insulation resistance
- Receptacle testing
Documented for
- NFPA 99
- AHCA facility licensure
- Joint Commission
- DNV / HFAP
- AAAASF / AAAHC
- CLIA & CAP records
Schedule electrical safety checks around your facility
Send your location, equipment list and preferred service window. Include the manufacturer, model and asset or serial number where available. We confirm the applicable checks for each device and coordinate access with your team.
Keep the measured results, device identification and service dates together in your equipment records. Electrical safety testing can be coordinated with preventive maintenance or calibration; your facility determines its inspection requirements and service intervals.
Schedule equipment electrical safety testing
Send your equipment list, facility location and preferred dates. We will confirm the applicable testing scope and provide a quote for your medical or laboratory equipment.